JT Series - Union TEE

JT Series - Union TEE
  • 1/8" to 7/8" Compression sizes
  • Plastic Gripper Nut, Standard Ferrule Nut and Steel Gripper Nut available
  • Molded of White Polypropylene, Kynar (PVDF), Nylon and Acetal
  • For use with plastic, stainless steel, copper and other tubings
  • Leak-proof and corrosion-proof
  • Simple to install: just cut tubing end square, insert into fitting without disassembling and tighten ferrule nut for seal
  • No flaring required
  • Operating Pressure: Standard Ferrule Nut - 50 psi, Plastic and Steel Gripper Nut - 220 psi
  • Note : When soft tubings such as Vinyl or Polyurethane are used, Tubing Inserts should be added

61-70 of 91

# Item
 
 
 
JT-5838-C-SG 5/8" x 1/2" Compression Steel Gripper Nut Celcon
JT-5838-K-PG 5/8" x 1/2" Compression Plastic Gripper Nut Kynar
JT-5838-K-SG 5/8" x 1/2" Compression Steel Gripper Nut Kynar
JT-5838-N-PG 5/8" x 1/2" Compression Plastic Gripper Nut Nylon
JT-5838-N-SG 5/8" x 1/2" Compression Steel Gripper Nut Nylon
JT-5838-PP-PG 5/8" x 1/2" Compression Plastic Gripper Nut Polypropylene
JT-5838-PP-SG 5/8" x 1/2" Compression Steel Gripper Nut Polypropylene
JT-34-C-PG 3/4" Compression Plastic Gripper Nut Celcon
JT-34-C-SG 3/4" Compression Steel Gripper Nut Celcon
JT-34-K-PG 3/4" Compression Plastic Gripper Nut Kynar