Push-In Swivel Fittings

6520 Series - Male NPT Swivel Elbow

1/8" to 1/2" Push-In
1/8" to 1/2" Male NPT
Electroless nickel-plated brass
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

C6520 Series - Male NPT Swivel Elbow with Coated Threads

1/8" to 1/2" Push-In
1/8" to 1/2" Male NPT
Electroless nickel-plated brass
The coating sealant on the thread is Loctite Vibra-Seal 516
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
The coating sealant on the thread is Loctite Vibra-Seal 516

P6520 Pro-Fit® Series - Male NPT Swivel Elbow

1/8" to 1/2" Push-In
1/8" to 1/2" Male NPT
Pro-Fit® thread design allows assembly with all female thread NPT forms
The new model is interchangeable with tapered thread fittings
The special sealing method has a locking effect similar to that of the taper model
Since the sealing ring is made of PTFE (Teflon®), it is not subject to wear and can be used repeatedly
Thread tape and thread sealants of other materials can be replaced, eliminating the need for full-length NPT thread, thus reducing the fitting size
Sealing is achieved on inclined, concave and convex surfaces

6522 Micro Series - Male BSPP Metric Swivel Elbow

3mm Push-In
M3 and M5 Male Metric
Electroless nickel-plated brass
The sealing ring (O-ring) can be easily replaced if it is damaged
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
Lock the tube quickly and effortlessly

6522 Series - Male BSPP & Metric Swivel Elbow

4mm to 14mm Push-In
M5 Male Metric, 1/8" to 1/2" Male BSPP
Electroless nickel-plated brass
The sealing ring (O-ring) can be easily replaced if it is damaged
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
Lock the tube quickly and effortlessly

6522 Series - Male UNF Swivel Elbow

1/8", 5/32" and 1/4" Push-In
10-32 Male UNF
Electroless nickel-plated brass
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

6525 Sprint® Series - Extended Male BSPP Swivel Elbow

6mm and 8mm Push-In
1/8" and 1/4" Male BSPP
Electroless nickel-plated brass
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types
The new model is interchangeable with tapered thread fittings, both BSPT and BSPP
The special sealing method has a locking effect similar to that of other tapered threads
The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly
Sealing is achieved on inclined, concave and convex surfaces
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

P6525 Pro-Fit® Series - Extended Male NPT Swivel Elbow

5/32" to 3/8" Push-In
1/8" to 3/8" Male NPT
Electroless nickel-plated brass
Pro-Fit® thread design allows assembly with all female thread NPT forms
The new model is interchangeable with tapered thread fittings
The special sealing method has a locking effect similar to that of the taper model
Since the sealing ring is made of PTFE (Teflon®), it is not subject to wear and can be used repeatedly
Thread tape and thread sealants of other materials can be replaced, eliminating the need for full-length NPT thread, thus reducing the fitting size
Sealing is achieved on inclined, concave and convex surfaces

6430 Series - Male NPT Branch Swivel Tee

1/8" to 1/2" Push-In
1/8" to 1/2" Male NPT
Electroless nickel-plated brass
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

C6430 Series - Male NPT Branch Swivel Tee with Coated Threads

1/8" to 1/2" Push-In
1/8" to 1/2" Male NPT
Electroless nickel-plated brass
The coating sealant on the thread is Loctite Vibra-Seal 516
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

P6430 Pro-Fit® Series - Male NPT Branch Swivel Tee

1/8" to 1/2" Push-In
1/8" to 1/2" Male NPT
Electroless nickel-plated brass
Pro-Fit® thread design allows assembly with all female thread NPT forms
The new model is interchangeable with tapered thread fittings
The special sealing method has a locking effect similar to that of the taper model
Since the sealing ring is made of PTFE (Teflon®), it is not subject to wear and can be used repeatedly
Thread tape and thread sealants of other materials can be replaced, eliminating the need for full-length NPT thread, thus reducing the fitting size
Sealing is achieved on inclined, concave and convex surfaces

S6430 Sprint® Series - Male BSPP Branch Swivel Tee

4mm to 14mm Push-In
1/8" to 1/2" Male BSPP
Electroless nickel-plated brass
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types
The new model is interchangeable with tapered thread fittings, both BSPT and BSPP
The special sealing method has a locking effect similar to that of other tapered threads
The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly
Sealing is achieved on inclined, concave and convex surfaces
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

6432 Micro Series - Male Metric Branch Swivel Tee

3mm Push-In
M3 and M5 Male Metric
Electroless nickel-plated brass
The sealing ring (O-ring) can be easily replaced if it is damaged
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
Lock the tube quickly and effortlessly

6432 Series - Male BSPP & Metric Branch Swivel Tee

4mm to 12mm
M5 Male Metric, 1/8" to 3/8" Male BSPP
Electroless nickel-plated brass
The sealing ring (O-ring) can be easily replaced if it is damaged
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times

6432 Series - Male UNF Branch Swivel Tee

1/8" and 5/32" Push-In
10-32 Male UNF
Electroless nickel-plated brass
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

6440 Series - Male NPT Run Swivel Tee

1/8" to 1/2" Push-In
1/8" to 1/2" Male NPT
Electroless nickel-plated brass
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

C6440 Series - Male NPT Run Swivel Tee with Coated Threads

1/8" to 1/2" Push-In
1/8" to 1/2" Male NPT
Electroless nickel-plated brass
The coating sealant on the thread is Loctite Vibra-Seal 516
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

P6440 Pro-Fit® Series - Male NPT Run Swivel Tee

1/8" to 1/2" Push-In
1/8" to 1/2" Male NPT
Electroless nickel-plated brass
Pro-Fit® thread design allows assembly with all female thread NPT forms
The new model is interchangeable with tapered thread fittings
The special sealing method has a locking effect similar to that of the taper model
Since the sealing ring is made of PTFE (Teflon®), it is not subject to wear and can be used repeatedly
Thread tape and thread sealants of other materials can be replaced, eliminating the need for full-length NPT thread, thus reducing the fitting size
Sealing is achieved on inclined, concave and convex surfaces

S6440 Sprint® Series - Male BSPP Run Swivel Tee

4mm to 14mm Push-In
1/8" to 1/2" Male BSPP
Electroless nickel-plated brass
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types
The new model is interchangeable with tapered thread fittings, both BSPT and BSPP
The special sealing method has a locking effect similar to that of other tapered threads
The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly
Sealing is achieved on inclined, concave and convex surfaces
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

6442 Micro Series - Male Metric Run Swivel Tee

3mm Push-In
M3 and M5 Male Metric
Electroless nickel-plated brass
The sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
Lock the tube quickly and effortlessly

6442 Series - Male BSPP & Metric Run Swivel Tee

4mm to 12mm Push-In
M5 Male Metric to 3/8" Male BSPP
Electroless nickel-plated brass
The sealing ring (O-ring) can be easily replaced if it is damaged
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
Lock the tube quickly and effortlessly

6442 Series - Male UNF Run Swivel Tee

1/8" and 5/32" Push-In
10-32 Male UNF
Electroless nickel-plated brass
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

6450 Series - Male NPT Swivel "Y"

1/8", 5/32" and 1/4" Push-In
1/8" Male NPT
Electroless nickel-plated brass
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

C6450 Series - Male NPT Swivel "Y" with Coated Threads

1/8", 5/32" and 1/4" Push-In
1/8" Male NPT
Electroless nickel-plated brass
The coating sealant on the thread is Loctite Vibra-Seal 516
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

P6450 Pro-Fit® Series - Male NPT Swivel "Y"

1/8" to 3/8" Push-In
1/8" and 1/4" Male NPT
Pro-Fit® thread design allows assembly with all female thread NPT forms
The new model is interchangeable with tapered thread fittings
The special sealing method has a locking effect similar to that of the taper model
Since the sealing ring is made of PTFE (Teflon®), it is not subject to wear and can be used repeatedly
Thread tape and thread sealants of other materials can be replaced, eliminating the need for full-length NPT thread, thus reducing the fitting size
Sealing is achieved on inclined, concave and convex surfaces

S6450 Sprint® Series - Male BSPP Swivel "Y"

4mm to 8mm Push-In
M5 Male Metric, 1/8" and 1/4" Male BSPP
Electroless nickel-plated brass
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types
The new model is interchangeable with tapered thread fittings, both BSPT and BSPP
The special sealing method has a locking effect similar to that of other tapered threads
The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly
Sealing is achieved on inclined, concave and convex surfaces
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
Push-in” and Lock the tube quickly and effortlessly

6452 Micro Series - Metric Male Swivel "Y"

3mm Push-In
M3 to M5 Male Metric
Electroless nickel-plated brass
The sealing ring (O-ring) can be easily replaced if it is damaged
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
Lock the tube quickly and effortlessly

S6520 Sprint® Series Male BSPP Swivel Elbow

4mm to 14mm Push-In
1/8" to 1/2" Male BSPP
Electroless nickel-plated brass
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types
The new model is interchangeable with tapered thread fittings, both BSPT and BSPP
The special sealing method has a locking effect similar to that of other tapered threads
The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly
Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size
Sealing is achieved on inclined, concave and convex surfaces
Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools
Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times
“Push-in” and Lock the tube quickly and effortlessly

BULK ORDER PAD

Push-In Swivel Fittings Options