JMT Series - Male Run Tee

JMT Series - Male Run Tee
  • 1/4" to 7/8" Compression sizes
  • 1/8" to 3/4" Male NPT
  • Plastic Gripper Nut, Standard Ferrule Nut and Steel Gripper Nut available
  • Molded of White Polypropylene, Kynar (PVDF), Nylon and Acetal
  • For use with plastic, stainless steel, copper and other tubings
  • Leak-proof and corrosion-proof
  • Simple to install: just cut tubing end square, insert into fitting without disassembling and tighten ferrule nut for seal
  • No flaring required
  • Operating Pressure: Standard Ferrule Nut - 50 psi, Plastic and Steel Gripper Nut - 220 psi
  • Note : When soft tubings such as Vinyl or Polyurethane are used, Tubing Inserts should be added

11-20 of 99

# Item
 
 
 
 
JMT-14-4M-N 1/4" Compression 1/4" Male NPT Standard Ferrule Nut Nylon
JMT-14-4M-N-PG 1/4" Compression 1/4" Male NPT Plastic Gripper Nut Nylon
JMT-14-4M-N-SG 1/4" Compression 1/4" Male NPT Steel Gripper Nut Nylon
JMT-14-4M-PP 1/4" Compression 1/4" Male NPT Standard Ferrule Nut Polypropylene
JMT-14-4M-PP-PG 1/4" Compression 1/4" Male NPT Plastic Gripper Nut Polypropylene
JMT-14-4M-PP-SG 1/4" Compression 1/4" Male NPT Steel Gripper Nut Polypropylene
JMT-516-4M-C 5/16" Compression 1/4" Male NPT Standard Ferrule Nut Celcon
JMT-516-4M-C-PG 5/16" Compression 1/4" Male NPT Plastic Gripper Nut Celcon
JMT-516-4M-C-SG 5/16" Compression 1/4" Male NPT Steel Gripper Nut Celcon
JMT-516-4M-K 5/16" Compression 1/4" Male NPT Standard Ferrule Nut Kynar