JC Series - Male Connector

JC Series - Male Connector
  • 1/8" to 7/8" Compression sizes
  • 1/8" to 3/4" Male NPT
  • Molded of White Polypropylene, Kynar (PVDF), Nylon and Acetal
  • For use with plastic, stainless steel, copper and other tubings
  • Leak-proof and corrosion-proof
  • Simple to install: just cut tubing end square, insert into fitting without disassembling and tighten ferrule nut for seal
  • No flaring required
  • Operating Pressure: Standard Ferrule Nut - 50 psi, Plastic and Steel Gripper Nut - 220 psi
  • Note : When soft tubings such as Vinyl or Polyurethane are used, Tubing Inserts should be added

41-50 of 190

# Item
 
 
 
 
JC-12-2M-K-PG 1/2" Compression 1/8" Male NPT Plastic Gripper Nut Kynar
JC-12-2M-K-SG 1/2" Compression 1/8" Male NPT Steel Gripper Nut Kynar
JC-12-2M-N 1/2" Compression 1/8" Male NPT Standard Ferrule Nut Nylon
JC-12-2M-N-PG 1/2" Compression 1/8" Male NPT Plastic Gripper Nut Nylon
JC-12-2M-N-SG 1/2" Compression 1/8" Male NPT Steel Gripper Nut Nylon
JC-12-2M-PP 1/2" Compression 1/8" Male NPT Standard Ferrule Nut Polypropylene
JC-12-2M-PP-PG 1/2" Compression 1/8" Male NPT Plastic Gripper Nut Polypropylene
JC-12-2M-PP-SG 1/2" Compression 1/8" Male NPT Steel Gripper Nut Polypropylene
JC-14-4M-C 1/4" Compression 1/4" Male NPT Standard Ferrule Nut Celcon
JC-14-4M-C-PG 1/4" Compression 1/4" Male NPT Plastic Gripper Nut Celcon